Phone Modu T | developer.brewmp.com Phone Modu T | developer.brewmp.com

Developer

Phone Modu T

Phone is not on your list of devices, although there was information that Qualcomm developed the hardware and software. Please tell:

1. How to enable diagnostic mode (debug mode)?

2. Which sdk to use for this phone, which would update the software and add support for the Russian language?

 

SW Version: modu T-00-3-V4.0.077.1108161240

Customization pack: modu T-01-ISR.0.024

JRC Version: modu T-05-0-DEF.0.014

HW Version: modu T REV:1.04

RF Version: modu T-02-1.5.40-DEF.0-WB1_G90018001900-AGPSUP-v.1

 

Thank you!

wats the model of your device? From where did you get it?

wats the model of your device? From where did you get it?

The device is designed for software and hardware-based Qualcomm (same as HTC Smart). Used processor qsc6270.
"http://www.crunchbase.com/company/modu"

The device is designed for software and hardware-based Qualcomm (same as HTC Smart). Used processor qsc6270.
"http://www.crunchbase.com/company/modu"

The device is based on Brew 4.0.2. You may use this SDK to developer for this device. Not sure about russian language support.
what do u mean by enabling debug mode?

The device is based on Brew 4.0.2. You may use this SDK to developer for this device. Not sure about russian language support.
what do u mean by enabling debug mode?

Yes, brew 4.0.2.
The device works via usb port and is enabled by default only modem + flash card. Debug mode includes diagnostic port - modem diag.
Just had to submit the correct AT command to the modem.
 
There is a new problem, usb gateway gives an error com port also swears and sends BTIL, BTIL also a mistake. The loader opens diag port and ESF, but not completely. Why is that?

Yes, brew 4.0.2.
The device works via usb port and is enabled by default only modem + flash card. Debug mode includes diagnostic port - modem diag.
Just had to submit the correct AT command to the modem.
 
There is a new problem, usb gateway gives an error com port also swears and sends BTIL, BTIL also a mistake. The loader opens diag port and ESF, but not completely. Why is that?

Is it possible to upload the image of the device - the phone and run
simulator?

Is it possible to upload the image of the device - the phone and run
simulator?

this is not a Brew MP device, so USB gateway won't work.
 
Try using the Loader to connect with the 3rd option: Brew Device (COM/Diag).
Also u may try installing :
BREW Tools Suite
https://developer.brewmp.com/file/2242/BREWTOOLSSUITE311SP03.msi/ajax/0
 
It has a legacy Brew App Loader, you may be a connect the device using that tool.

this is not a Brew MP device, so USB gateway won't work.
 
Try using the Loader to connect with the 3rd option: Brew Device (COM/Diag).
Also u may try installing :
BREW Tools Suite
https://developer.brewmp.com/file/2242/BREWTOOLSSUITE311SP03.msi/ajax/0
 
It has a legacy Brew App Loader, you may be a connect the device using that tool.

Is it possible to upload the image of the device - the phone and run
simulator?
Do you have a Brew 4.x simulator?
If not download the "Brew 4.0.2 Platform"
on https://developer.brewmp.com/tools/prior-brew-tools
 
this will install Brew Simulator for 4.x & some default devices.
You may just edit the screen size of one of the default simulator to that of your device.

Is it possible to upload the image of the device - the phone and run
simulator?
Do you have a Brew 4.x simulator?
If not download the "Brew 4.0.2 Platform"
on https://developer.brewmp.com/tools/prior-brew-tools
 
this will install Brew Simulator for 4.x & some default devices.
You may just edit the screen size of one of the default simulator to that of your device.

could you change the software on the phone? I have the same problem. Can you give me a tutorial? Thank you very much
 
Ralf

could you change the software on the phone? I have the same problem. Can you give me a tutorial? Thank you very much
 
Ralf

software on this device can be changed only by the OEM.

software on this device can be changed only by the OEM.