Forums | developer.brewmp.com Forums | developer.brewmp.com

Developer

Forums

Hi,

I am new to mobile technology and Brew.

I don't know how to start with.

Please help me How I can start.Means step by step guide like which SDK should I install which lagnuage I should learn to get familiar with Brew.

Thanks

 

Pramod.

Hello Pramod,
Welcome to Brew MP development!
I would suggest that you first take a look at our Brew MP Developmer Primer.  This will you the basics of working with Brew MP and help you to get your first Brew MP application up and running.  The link is found here:
https://developer.brewmp.com/resources/primers/brew-mp-developer-primer
You may also want to take a look at our Brew MP training modules as they will give you a solid tour of Brew MP and help you to find and work with some of the other resources available, link is here:
https://developer.brewmp.com/resources/training_module
If you have any further questions, please feel free to let me know.
Regards,
Brian

Hello Pramod,
Welcome to Brew MP development!
I would suggest that you first take a look at our Brew MP Developmer Primer.  This will you the basics of working with Brew MP and help you to get your first Brew MP application up and running.  The link is found here:
https://developer.brewmp.com/resources/primers/brew-mp-developer-primer
You may also want to take a look at our Brew MP training modules as they will give you a solid tour of Brew MP and help you to find and work with some of the other resources available, link is here:
https://developer.brewmp.com/resources/training_module
If you have any further questions, please feel free to let me know.
Regards,
Brian

Hello Brain,
Thank you very much for reply.
I will go through the links you provided.
And let you know any questions if any.
Thank you very much agian.
 
Thanks,
Pramod.

Hello Brain,
Thank you very much for reply.
I will go through the links you provided.
And let you know any questions if any.
Thank you very much agian.
 
Thanks,
Pramod.

Hi Brain,
When I try to create new project I didn't see any connection manager screen.Did i miss something like any setup.Please help me.
Thanks,
Pramod

Hi Brain,
When I try to create new project I didn't see any connection manager screen.Did i miss something like any setup.Please help me.
Thanks,
Pramod

 
 
Hi Brain,
I also got following error when I try to run the application.
Unable to install the package file to the target
The package file does not exist:f:\BREW\helloword\run\Helloword_Win32_Debug.brewmp
Thanks,
Pramod

 
 
Hi Brain,
I also got following error when I try to run the application.
Unable to install the package file to the target
The package file does not exist:f:\BREW\helloword\run\Helloword_Win32_Debug.brewmp
Thanks,
Pramod

Hello Pramod,
Can I ask which development environment you are using?  If it's Visual Studio, we support only Pro versions of 2005, 2008, 2010 (not the express version).  Did you successfully install the plugins from SDK Manager?  Please let me know where you are in the process outlined in the primer and I can assist further.
Regards,
Brian

Hello Pramod,
Can I ask which development environment you are using?  If it's Visual Studio, we support only Pro versions of 2005, 2008, 2010 (not the express version).  Did you successfully install the plugins from SDK Manager?  Please let me know where you are in the process outlined in the primer and I can assist further.
Regards,
Brian

Hello Brain,
I am using Visual studio 2008 Professional Edition.
I am able to install plugins Successfully and able to view menu bar for BREW.
I am stuck in visual studio project wizard.
when I try to create new project I am not able to see connection manager window. Directly see template for brew project like C application.
Please let me know if you need more information.
Thanks,
Pramod

Hello Brain,
I am using Visual studio 2008 Professional Edition.
I am able to install plugins Successfully and able to view menu bar for BREW.
I am stuck in visual studio project wizard.
when I try to create new project I am not able to see connection manager window. Directly see template for brew project like C application.
Please let me know if you need more information.
Thanks,
Pramod

Hi,
Are you trying to run your app on the Simulator? If so, you weill need to create a Sim Target using Target Manager (SDK Manager or from Brew MP VS toolbar (tools)). Then you will need to set your target type to Simulator and select the target that you created. Please refer to Tools Reference as well.
If you're trying to do something else, please explain to me where the connection manager window that you're seeing is located.
Thanks,Karina

Hi,
Are you trying to run your app on the Simulator? If so, you weill need to create a Sim Target using Target Manager (SDK Manager or from Brew MP VS toolbar (tools)). Then you will need to set your target type to Simulator and select the target that you created. Please refer to Tools Reference as well.
If you're trying to do something else, please explain to me where the connection manager window that you're seeing is located.
Thanks,Karina

Hi Karina,
I new to Brew and I just follow the instruction provided in Brew MP developer primer.
I set the target using Targer manger.please refer following image.

I think this is what you mean to say.
Thanks,
Pramod
 

Hi Karina,
I new to Brew and I just follow the instruction provided in Brew MP developer primer.
I set the target using Targer manger.please refer following image.

I think this is what you mean to say.
Thanks,
Pramod
 

Hi Pramod,
I'm not able to see your image. However, are you referring to the "Connection Manager" that is stated in the Device Setup step?  If so, please tell me whether you are trying to run your Brew MP app on Simulator or device. Easiest thing would be to try running on Simulator first. So, to do that follow these steps:
https://developer.brewmp.com/resources/primers/brew-mp-developer-primer/...
Let me know how this goes.
Thanks,Karina
 

Hi Pramod,
I'm not able to see your image. However, are you referring to the "Connection Manager" that is stated in the Device Setup step?  If so, please tell me whether you are trying to run your Brew MP app on Simulator or device. Easiest thing would be to try running on Simulator first. So, to do that follow these steps:
https://developer.brewmp.com/resources/primers/brew-mp-developer-primer/...
Let me know how this goes.
Thanks,Karina
 

Hi Karina,
I followed the step as per artical you send.
I configured every thing but I am getting same error.
error is:
Unable to install the package file to the target.
The package file does not exist:
f:\Brew\helloword\run\helloword_Win32_Debug.brewmp
 
In the dropdown I have selected
First dropdown: Brew MP Simulation Target
Second Dropdown: Sapphire(1.0.2.488)
 
 
Thanks,
Pramod

Hi Karina,
I followed the step as per artical you send.
I configured every thing but I am getting same error.
error is:
Unable to install the package file to the target.
The package file does not exist:
f:\Brew\helloword\run\helloword_Win32_Debug.brewmp
 
In the dropdown I have selected
First dropdown: Brew MP Simulation Target
Second Dropdown: Sapphire(1.0.2.488)
 
 
Thanks,
Pramod

Hi Karina,
I followed the step as per artical you send.
I configured every thing but I am getting same error.
error is:
Unable to install the package file to the target.
The package file does not exist:
f:\Brew\helloword\run\helloword_Win32_Debug.brewmp
 
In the dropdown I have selected
First dropdown: Brew MP Simulation Target
Second Dropdown: Sapphire(1.0.2.488)
 
 
Thanks,
Pramod

Hi Karina,
I followed the step as per artical you send.
I configured every thing but I am getting same error.
error is:
Unable to install the package file to the target.
The package file does not exist:
f:\Brew\helloword\run\helloword_Win32_Debug.brewmp
 
In the dropdown I have selected
First dropdown: Brew MP Simulation Target
Second Dropdown: Sapphire(1.0.2.488)
 
 
Thanks,
Pramod

Hi Pramod,
Can you please copy and paste the entire output from your VS Output wiindow so I can take a look at what might be going wrong?
Thanks,Karina

Hi Pramod,
Can you please copy and paste the entire output from your VS Output wiindow so I can take a look at what might be going wrong?
Thanks,Karina

Hi Karina,
This is errro message I am getting.
 
---------------------------Package does not exist---------------------------Unable to install the package file to the target.The package file does not exist:   f:\BREW\newhelloword\run\NewHelloWord_Win32_Debug.brewmp---------------------------OK   ---------------------------

Hi Karina,
This is errro message I am getting.
 
---------------------------Package does not exist---------------------------Unable to install the package file to the target.The package file does not exist:   f:\BREW\newhelloword\run\NewHelloWord_Win32_Debug.brewmp---------------------------OK   ---------------------------

Hi Pramod,
I need to see the output of the steps before this error occurs. Can you please do a clean, then rebuild and copy paste the entire output window (copy paste starting at the top of the VS output window)?
Thanks,Karina

Hi Pramod,
I need to see the output of the steps before this error occurs. Can you please do a clean, then rebuild and copy paste the entire output window (copy paste starting at the top of the VS output window)?
Thanks,Karina

Hi Karina,

Following is the content of output window.

Project Brew MP Version: 1.0.2.488
1>------ Build started: Project: NewHelloWord, Configuration: Debug Win32 ------
1>Creating MIF file from "f:\BREW\newhelloword\NewHelloWord.cif"
1>Creating BAR file from "f:\BREW\newhelloword\newhelloword.car"
1>Compiling...
1>NewHelloWord.c
1>AEEModGen.c
1>AEEAppGen.c
1>Generating Code...
1>Linking...
1>LINK : f:\BREW\newhelloword\Debug/NewHelloWord.dll not found or not built by the last incremental link; performing full link
1> Creating library f:\BREW\newhelloword\Debug/NewHelloWord.lib and object f:\BREW\newhelloword\Debug/NewHelloWord.exp
1>Embedding manifest...
1>Build log was saved at "file://f:\BREW\newhelloword\Debug\BuildLog.htm"
1>NewHelloWord - 0 error(s), 0 warning(s)
Packaging files...
C:\Program Files\Qualcomm\Brew MP SDK\Toolset 7.10 Rev 12.0.1554878\bin\bmppackager.exe package\Win32_Debug -i .mod,.mod1,.elf -f run\NewHelloWord_Win32_Debug.brewmp -v
Detected Brew MP file layout (single module)
./NewHelloWord/NewHelloWord.mif (902 bytes)
./NewHelloWord/NewHelloWord.dll (443904 bytes)
./NewHelloWord/newhelloword.bar (124 bytes)
./NewHelloWord/NewHelloWord.pdb (1780736 bytes)
Archive "run\NewHelloWord_Win32_Debug.brewmp" successfully written.
========== Build: 1 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========

 
Thanks,
Pramod

Hi Karina,

Following is the content of output window.

Project Brew MP Version: 1.0.2.488
1>------ Build started: Project: NewHelloWord, Configuration: Debug Win32 ------
1>Creating MIF file from "f:\BREW\newhelloword\NewHelloWord.cif"
1>Creating BAR file from "f:\BREW\newhelloword\newhelloword.car"
1>Compiling...
1>NewHelloWord.c
1>AEEModGen.c
1>AEEAppGen.c
1>Generating Code...
1>Linking...
1>LINK : f:\BREW\newhelloword\Debug/NewHelloWord.dll not found or not built by the last incremental link; performing full link
1> Creating library f:\BREW\newhelloword\Debug/NewHelloWord.lib and object f:\BREW\newhelloword\Debug/NewHelloWord.exp
1>Embedding manifest...
1>Build log was saved at "file://f:\BREW\newhelloword\Debug\BuildLog.htm"
1>NewHelloWord - 0 error(s), 0 warning(s)
Packaging files...
C:\Program Files\Qualcomm\Brew MP SDK\Toolset 7.10 Rev 12.0.1554878\bin\bmppackager.exe package\Win32_Debug -i .mod,.mod1,.elf -f run\NewHelloWord_Win32_Debug.brewmp -v
Detected Brew MP file layout (single module)
./NewHelloWord/NewHelloWord.mif (902 bytes)
./NewHelloWord/NewHelloWord.dll (443904 bytes)
./NewHelloWord/newhelloword.bar (124 bytes)
./NewHelloWord/NewHelloWord.pdb (1780736 bytes)
Archive "run\NewHelloWord_Win32_Debug.brewmp" successfully written.
========== Build: 1 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========

 
Thanks,
Pramod

Hi Karina,
I found something interesting. When I create new project and run it is showing above exeception. When I close the the project and open agian same project it runs fine.
 
By the way following is the output for the project I am getting.
 
Project Brew MP Version: 1.0.2.488
1>------ Build started: Project: TestBrew1, Configuration: Debug Win32 ------
1>Compiling...
1>TestBrew1.c
1>AEEModGen.c
1>AEEAppGen.c
1>Generating Code...
1>Linking...
1>LINK : f:\VC++\testbrew1\Debug/TestBrew1.dll not found or not built by the last incremental link; performing full link
1> Creating library f:\VC++\testbrew1\Debug/TestBrew1.lib and object f:\VC++\testbrew1\Debug/TestBrew1.exp
1>Embedding manifest...
1>Build log was saved at "file://f:\VC++\testbrew1\Debug\BuildLog.htm"
1>TestBrew1 - 0 error(s), 0 warning(s)
Warning: f:\VC++\testbrew1\Debug\testbrew1.bar was not found.
Warning: f:\VC++\testbrew1\Debug\TestBrew1.mif was not found.
Packaging files...
C:\Program Files\Qualcomm\Brew MP SDK\Toolset 7.10 Rev 12.0.1554878\bin\bmppackager.exe package\Win32_Debug -i .mod,.mod1,.elf -f run\TestBrew1_Win32_Debug.brewmp -v
Error S2016: Directory "package\Win32_Debug\TestBrew1": no Brew MP modules. Did you forget to include a mif file?
========== Build: 1 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
 
Thanks,
Pramod

Hi Karina,
I found something interesting. When I create new project and run it is showing above exeception. When I close the the project and open agian same project it runs fine.
 
By the way following is the output for the project I am getting.
 
Project Brew MP Version: 1.0.2.488
1>------ Build started: Project: TestBrew1, Configuration: Debug Win32 ------
1>Compiling...
1>TestBrew1.c
1>AEEModGen.c
1>AEEAppGen.c
1>Generating Code...
1>Linking...
1>LINK : f:\VC++\testbrew1\Debug/TestBrew1.dll not found or not built by the last incremental link; performing full link
1> Creating library f:\VC++\testbrew1\Debug/TestBrew1.lib and object f:\VC++\testbrew1\Debug/TestBrew1.exp
1>Embedding manifest...
1>Build log was saved at "file://f:\VC++\testbrew1\Debug\BuildLog.htm"
1>TestBrew1 - 0 error(s), 0 warning(s)
Warning: f:\VC++\testbrew1\Debug\testbrew1.bar was not found.
Warning: f:\VC++\testbrew1\Debug\TestBrew1.mif was not found.
Packaging files...
C:\Program Files\Qualcomm\Brew MP SDK\Toolset 7.10 Rev 12.0.1554878\bin\bmppackager.exe package\Win32_Debug -i .mod,.mod1,.elf -f run\TestBrew1_Win32_Debug.brewmp -v
Error S2016: Directory "package\Win32_Debug\TestBrew1": no Brew MP modules. Did you forget to include a mif file?
========== Build: 1 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
 
Thanks,
Pramod

Hi Pramod,
I'm happy that you have a workaround: close solution and re-open it the first time you create an app. This is a known issue on some machines. We are working on a fix for this in a future SDK release.
Thanks,
Karina

Hi Pramod,
I'm happy that you have a workaround: close solution and re-open it the first time you create an app. This is a known issue on some machines. We are working on a fix for this in a future SDK release.
Thanks,
Karina

This issue is resolved in the latest SDK: Brew MP SDK rev 7.11.2.
 
Thanks
-Tony

This issue is resolved in the latest SDK: Brew MP SDK rev 7.11.2.
 
Thanks
-Tony

Hi!
 
I am not sure this is the place to ask, but how do you add a an item to a title in the distribution extranet, without having to upload marketing collateral each time?  It's a new build with a higher version number and supporting more handsets, otherwise pretty much identical, which I want to add to a title, so I can distribute it to Verizon.

Hi!
 
I am not sure this is the place to ask, but how do you add a an item to a title in the distribution extranet, without having to upload marketing collateral each time?  It's a new build with a higher version number and supporting more handsets, otherwise pretty much identical, which I want to add to a title, so I can distribute it to Verizon.

see this:-
Assign marketing collateral to additional items –
https://developer.brewmp.com/resources/how/end-end-distribution-guide/su...
 
In point 4, you may need to go under "Attributes" Tab of the Item, to see MCS & MCS_PENDING Values.

In Point 7, you may need to go under "Attributes" Tab of the Item, to see "Manage Attributes" Button.

see this:-
Assign marketing collateral to additional items –
https://developer.brewmp.com/resources/how/end-end-distribution-guide/su...
 
In point 4, you may need to go under "Attributes" Tab of the Item, to see MCS & MCS_PENDING Values.

In Point 7, you may need to go under "Attributes" Tab of the Item, to see "Manage Attributes" Button.