Forums | developer.brewmp.com Forums | developer.brewmp.com

Developer

Forums

Hi guys,

I am not able to connect the device Samsung SCH-U740 with Apploader.When i connect it on Apploader it shows me device port value but not getting connection.
I have tried it with Autodetect and EFS1 mode connection. But it fails.
my other Samsung Devices are working properly.
Is there any specific driver connection required ?
plz reply.

Thanx in advance.

may be a driver issue.
Is it showing Sam WDM Serial Port in App Loader for this device.
check if port is not being used by any other S/W
re-start device.
also u may try QPST.
thanks.

may be a driver issue.
Is it showing Sam WDM Serial Port in App Loader for this device.
check if port is not being used by any other S/W
re-start device.
also u may try QPST.
thanks.

I tried with downloading QSPT. Can you please tell me how I can get MSL number to connect to QSPT.
Many thanks in advance.

I tried with downloading QSPT. Can you please tell me how I can get MSL number to connect to QSPT.
Many thanks in advance.

MSL.. where is that asked?
1- start QPST Configuration.
2- under ports tab you would see list of all COM ports.
3- check if ur device shows up any COM.
4- if yes, select it, go to Start Client->EFS Explorer.
5- if not, Select Add New Port & add ur device's serial port COM port as 'COM5' & the then go to 3.
thanks.

MSL.. where is that asked?
1- start QPST Configuration.
2- under ports tab you would see list of all COM ports.
3- check if ur device shows up any COM.
4- if yes, select it, go to Start Client->EFS Explorer.
5- if not, Select Add New Port & add ur device's serial port COM port as 'COM5' & the then go to 3.
thanks.

hi,
i tried with QPST,i go through steps u gave.
After selecting port when i click on EFSExplorer on QPST Configuration it wont show me any device connected.
It shows me Phone Selection window which have SPC field.
So what should i enter for SPC value?
Please reply.
thank you in advance.

hi,
i tried with QPST,i go through steps u gave.
After selecting port when i click on EFSExplorer on QPST Configuration it wont show me any device connected.
It shows me Phone Selection window which have SPC field.
So what should i enter for SPC value?
Please reply.
thank you in advance.

does it show some thing as attached. if so just press OK. if it does not connect still.
try getting in touch with Qualcomm directly:
http://brew.qualcomm.com/brew/supportportal_login.html
thanks

does it show some thing as attached. if so just press OK. if it does not connect still.
try getting in touch with Qualcomm directly:
http://brew.qualcomm.com/brew/supportportal_login.html
thanks

Would it not be best to call a technician from the Samsung company to fix the issue for you instead of posting it on the forum ?

Would it not be best to call a technician from the Samsung company to fix the issue for you instead of posting it on the forum ?