Forums | developer.brewmp.com Forums | developer.brewmp.com

Developer

Forums

Forums:

In the existing USB Settings menu, a new selection should be added for Developer Mode. Upon selecting this option, the Developer Mode menu will be launched.

1.)The Developer Mode menu should be in the standard native UI

2.) If not manufacturers need to put it in a hidden menu, then the menu should be accessible by typing in *#DEVMODE# from the keypad, or from the dialpad on a touch-only device.

Within the Developer Mode menu, the user is presented with the following options:

 

  • USB Gateway Only: This option must configure the Brew MP USB compositor to expose the GWOnly configuration. In this configuration, there is only one USB function composited on the USB port. It is Brew's Gateway function, for which the USB driver provided with the Brew SDK is fully compatible.
  • USB Gateway + COM Ports: This option must configure the Brew MP USB compositor to expose the USB Gateway as well as any of the traditional AMSS COM Ports. These COM ports nominally represent the Modem, Diagnostic, and NMEA ports or any others that are defined by the OEM. Each of these exposed USB interfaces requires a driver provided by the OEM to use.
  • Off: This option will return the device to the default setting.