API Reference | developer.brewmp.com API Reference | developer.brewmp.com

Developer

API Reference

AEETENDSTATUS

Brew Release
Brew MP 1.0.2
See Also
None
Description
Enumeration of call end status. The reason for ending a call.
Members
  • AEET_CALL_END_NONE : 
      A
  • AEET_CALL_END_CDMA_LOCK : phone is CDMA locked until power cycle
  • AEET_CALL_END_NO_SRV : phone has no service
  • AEET_CALL_END_FADE : Call has ended abnormally
  • AEET_CALL_END_INTERCEPT : received intercept from Base Station - orig only
  • AEET_CALL_END_REORDER : received reorder from Base Station - orig only
    
  • AEET_CALL_END_REL_NORMAL : received release from BS - no reason given
  • AEET_CALL_END_REL_SO_REJ : received release from BS - SO reject
    
  • AEET_CALL_END_INCOM_CALL : received incoming call from BS
    
  • AEET_CALL_END_ALERT_STOP : received alert stop from BS - incom only.
    
  • AEET_CALL_END_CLIENT_END : client ended the call
    
  • AEET_CALL_END_ACTIVATION : received end activation - OTASP call only.
    
  • AEET_CALL_END_MC_ABORT : system aborts the origination/conversation.
    
  • AEET_CALL_END_MAX_ACCESS_PROBE : Maximum access probes transmitted.
    
  • AEET_CALL_END_PSIST_NG : Persistence test failure
    
  • AEET_CALL_END_UIM_NOT_PRESENT : RUIM is not present
    
  • AEET_CALL_END_ACC_IN_PROG : Access attempt already in progress.
    
  • AEET_CALL_END_ACC_FAIL : Access failure for reason other than the above
    
  • AEET_CALL_END_RETRY_ORDER : Received retry order - orig only.
    
  • AEET_CALL_END_CCS_NOT_SUPPORTED_BY_BS : Concurrent servive is not supported by base station
    
  • AEET_CALL_END_NO_RESPONSE_FROM_BS : No response recived from base station
    
  • AEET_CALL_END_REJECTED_BY_BS : Call rejected by the base station
    
  • AEET_CALL_END_INCOMPATIBLE : Concurrent services requested were not compatible.
    
  • AEET_CALL_END_ACCESS_BLOCK : Access is blocked by base station.
    
  • AEET_CALL_END_ALREADY_IN_TC : Corresponds to AEET_CALL_ORIG_ERR_ALREADY_IN_TC
    
  • AEET_CALL_END_EMERGENCY_FLASHED : Call is ended due to Emergency call is flashed over this call.
    
  • AEET_CALL_END_USER_CALL_ORIG_DURING_GPS : Ending a GPS session in favor of a user call
    
  • AEET_CALL_END_USER_CALL_ORIG_DURING_SMS : Ending a SMS call in favor of a user call
    
  • AEET_CALL_END_LL_CAUSE : received a reason from lower layer,look in cc_cause.
    
  • AEET_CALL_END_CONF_FAILED : call orig request failed.
    
  • AEET_CALL_END_INCOM_REJ : client rejected the incoming call.
    
  • AEET_CALL_END_SETUP_REJ : client rejected the setup_ind.
    
  • AEET_CALL_END_NETWORK_END : network ended the call,look in cc_cause.
    
  • AEET_CALL_END_NO_FUNDS : No funds.
    
  • AEET_CALL_END_NO_GW_SRV : Phone has no service GSM/WCDMA
    
  • AEET_CALL_END_NO_CDMA_SRV : Phone has no service 1x.
    

  • AEET_CALL_END_CD_GEN_OR_BUSY : abort connection setup due to the reception of a ConnectionDeny message
        with deny code = general or network busy
    
  • AEET_CALL_END_CD_BILL_OR_AUTH : abort connection setup due to the reception of a ConnectionDeny message
        with deny code = billing or authentication failure
    
  • AEET_CALL_END_CHG_HDR : change HDR system due to redirection or PRL not preferred
    
  • AEET_CALL_END_EXIT_HDR : exit HDR  due to redirection or PRL not preferred
    
  • AEET_CALL_END_HDR_NO_SESSION : no HDR session
    
  • AEET_CALL_END_CM_COLLOC_ACQ_FAIL : Fail to acquire collocated HDR for origination
    
  • AEET_CALL_END_HDR_ORIG_DURING_GPS_FIX : Ending a HDR call orig in favor of GPS fix
    
  • AEET_CALL_END_HDR_CS_TIMEOUT : HDR CS Timeout
    
  • AEET_CALL_END_OTASP_SPC_ERR : call end due to OTASP service programming code value error
    
  • AEET_CALL_END_USER_CALL_ORIG_DURING_DATA : Ending a DATA call in favor of an emergency call
    
  • AEET_CALL_END_REDIR_OR_HANDOFF : Call rejected because of redirection or handoff
    
  • AEET_CALL_END_ACCESS_BLOCK_ALL : Access is blocked by base station for all mobiles. CDMA only.
    
  • AEET_CALL_END_NO_FULL_SRV : Full srv unavailable.
    
  • AEET_CALL_END_MAX_PS_CALLS : Indicates resources not available to handle new MO/MT PS call.
    
  • AEET_CALL_END_HDR_RELEASED_BY_CM : Released HDR call so 1X call can continue.
    
  • AEET_CALL_END_HOLD_DBM_IN_PROG : Hold the HDR origination to allow 1X SMS to end.
    
  • AEET_CALL_END_OTASP_COMMIT_IN_PROG : Call end due to OTASP commit in progress.
    
  • AEET_CALL_END_NO_HYBR_HDR_SRV : Mobile has no Hybrid HDR service.
    
  • AEET_CALL_END_HDR_NO_LOCK_GRANTED : Call ended because HDR didn't get the RF Lock.
    
  • AEET_CALL_END_HOLD_OTHER_IN_PROG : Hold the the current call to allow other call to end.
    
  • AEET_CALL_END_VIDEO_CONN_LOST : Modem released the call after the modem had been connected.
    
  • AEET_CALL_END_VIDEO_SETUP_FAILURE : Call setup failed while trying to setup the modem.
    
  • AEET_CALL_END_VIDEO_PROTOCOL_CLOSED : Video protocol closed after the video protocol setup was done
    
  • AEET_CALL_END_VIDEO_PROTOCOL_SETUP_FAILURE : Video protocol setup failed.
    
  • AEET_CALL_END_INTERNAL_ERROR : Internal error other than any of the above.
    
  • AEET_CALL_END_NO_WLAN_SRV : No WLAN service.
    
  • AEET_CALL_END_VOIP_FAIL_WLAN : VOIP failed on WLAN.
    
  • AEET_CALL_END_IP_FAIL : Call origination on IP Failed.
    
  • AEET_CALL_END_IP_RETRY : Call needs to be retried on IP.
    
  • AEET_IP_CALL_END_EMERG_ORIG : Call ended due to emergency origination.
    
  • AEET_CALL_END_ORIG_THR : Origination throttled.
Definition
  • typedef enum
    {
      AEET_CALL_END_NONE=-1,
      AEET_CALL_END_OFFLINE=0,
      AEET_CALL_END_CDMA_LOCK=20,
      AEET_CALL_END_NO_SRV=21,
      AEET_CALL_END_FADE=22,
      AEET_CALL_END_INTERCEPT=23,
      AEET_CALL_END_REORDER=24,
      AEET_CALL_END_REL_NORMAL=25,
      AEET_CALL_END_REL_SO_REJ=26,
      AEET_CALL_END_INCOM_CALL=27,
      AEET_CALL_END_ALERT_STOP=28,
      AEET_CALL_END_CLIENT_END=29,
      AEET_CALL_END_ACTIVATION=30,
      AEET_CALL_END_MC_ABORT=31,
      AEET_CALL_END_MAX_ACCESS_PROBE=32,
      AEET_CALL_END_PSIST_NG=33,
      AEET_CALL_END_UIM_NOT_PRESENT=34,
      AEET_CALL_END_ACC_IN_PROG=35,
      AEET_CALL_END_ACC_FAIL=36,
      AEET_CALL_END_RETRY_ORDER=37,
      AEET_CALL_END_CCS_NOT_SUPPORTED_BY_BS=38,
      AEET_CALL_END_NO_RESPONSE_FROM_BS=39,
      AEET_CALL_END_REJECTED_BY_BS=40,
      AEET_CALL_END_INCOMPATIBLE=41,
      AEET_CALL_END_ACCESS_BLOCK=42,
      AEET_CALL_END_ALREADY_IN_TC=43,
      AEET_CALL_END_EMERGENCY_FLASHED=44,
      AEET_CALL_END_USER_CALL_ORIG_DURING_GPS=45,
      AEET_CALL_END_USER_CALL_ORIG_DURING_SMS=46,
      AEET_CALL_END_LL_CAUSE=100,
      AEET_CALL_END_CONF_FAILED,
      AEET_CALL_END_INCOM_REJ,
      AEET_CALL_END_SETUP_REJ,
      AEET_CALL_END_NETWORK_END,
      AEET_CALL_END_NO_FUNDS,
      AEET_CALL_END_NO_GW_SRV,
      AEET_CALL_END_NO_CDMA_SRV,
      AEET_CALL_END_CD_GEN_OR_BUSY=150,
      AEET_CALL_END_CD_BILL_OR_AUTH=151,
      AEET_CALL_END_CHG_HDR=152,
      AEET_CALL_END_EXIT_HDR=153,
      AEET_CALL_END_HDR_NO_SESSION=154,
      AEET_CALL_END_CM_COLLOC_ACQ_FAIL=155,
      AEET_CALL_END_HDR_ORIG_DURING_GPS_FIX=156,
      AEET_CALL_END_HDR_CS_TIMEOUT=157,
      AEET_CALL_END_OTASP_SPC_ERR=0x010623e0,
      AEET_CALL_END_USER_CALL_ORIG_DURING_DATA=0x01088ed5,
      AEET_CALL_END_REDIR_OR_HANDOFF=0x01088ed6,
      AEET_CALL_END_ACCESS_BLOCK_ALL=0x01088ed7,
      AEET_CALL_END_NO_FULL_SRV=0x01088ed8,
      AEET_CALL_END_MAX_PS_CALLS=0x01088ed9,
      AEET_CALL_END_HDR_RELEASED_BY_CM=0x01088eda,
      AEET_CALL_END_HOLD_DBM_IN_PROG=0x01088edb,
      AEET_CALL_END_OTASP_COMMIT_IN_PROG=0x01088edc,
      AEET_CALL_END_NO_HYBR_HDR_SRV=0x01088edd,
      AEET_CALL_END_HDR_NO_LOCK_GRANTED=0x01088ede,
      AEET_CALL_END_HOLD_OTHER_IN_PROG=0x01088edf,
      AEET_CALL_END_VIDEO_CONN_LOST=0x01088ee0,
      AEET_CALL_END_VIDEO_SETUP_FAILURE=0x01088ee1,
      AEET_CALL_END_VIDEO_PROTOCOL_CLOSED=0x01088ee2,
      AEET_CALL_END_VIDEO_PROTOCOL_SETUP_FAILURE=0x01088ee3,
      AEET_CALL_END_INTERNAL_ERROR=0x01088ee4,
      AEET_CALL_END_NO_WLAN_SRV=0x01088ee6,
      AEET_CALL_END_VOIP_FAIL_WLAN=0x01088ee7,
      AEET_CALL_END_IP_FAIL=0x01088ee8,
      AEET_CALL_END_IP_RETRY=0x01088ee9,
      AEET_IP_CALL_END_EMERG_ORIG=0x01088eea,
      AEET_CALL_END_ORIG_THR=0x01088eeb,
    } AEETEndStatus;
    
Comments
None